how to factory set a nuvision tablet through fastboot

64 viewsTablet

4 Answers

0 Comments

To factory reset your Nuvision tablet using Fastboot, follow these steps carefully, ensuring you have all the necessary tools ready. You will need a computer, a USB cable, and the ADB and Fastboot tools installed on the computer.

  1. Prepare Your Tablet:

    • Ensure your tablet is powered off.
    • Press and hold the Volume Down button and the Power button simultaneously.
    • This will boot the tablet into Fastboot mode. You should see a screen with the Fastboot logo.

  2. Enable USB Debugging:

    • If necessary, power on your tablet normally.
    • Navigate to Settings > About Tablet and tap on ‘Build Number’ seven times to enable Developer Options.
    • Go back to Settings and enter Developer Options. Enable ‘USB Debugging’.

  3. Set Up Your Computer:

    • Download and install ADB and Fastboot tools from the official Android website.
    • Connect your tablet to the computer using a USB cable.
    • Open a Command Prompt or Terminal window on your computer.

  4. Verify Connection:

    • Type adb devices in the Command Prompt to ensure your tablet is recognized. You should see your device listed.
    • If your device is not listed, ensure USB drivers are installed and USB Debugging is enabled.

  5. Enter Fastboot Mode:

    • With your tablet still connected, type adb reboot bootloader in the Command Prompt. This command will reboot your tablet into Fastboot mode.
    • Alternatively, if the tablet is stuck in Fastboot, manually reboot into Fastboot mode as described in step 1.

  6. Factory Reset Command:

    • Once in Fastboot mode, type fastboot devices to confirm connection.
    • Enter fastboot erase userdata to wipe all user data from the tablet.
    • After the command completes, type fastboot reboot to restart the tablet.

  7. Complete the Process:

    • Wait for the tablet to reboot.
    • The device should now be restored to its original factory settings.

Be meticulous with the commands and ensure you follow each step precisely to avoid any issues. This method ensures a clean reset via Fastboot mode, ideal for when you can’t access your tablet’s settings.

0
0 Comments

To factory reset a Nuvision tablet via Fastboot, follow these steps:

  1. Preparation:

    • Power off the tablet.
    • Press and hold Volume Down + Power buttons until Fastboot mode appears.

  2. Enable USB Debugging:

    • Turn on the tablet, go to Settings > About Tablet, tap ‘Build Number’ seven times to unlock Developer Options.
    • Enable ‘USB Debugging’ in Developer Options.

  3. Install Tools on PC:

    • Download and install ADB and Fastboot.
    • Connect the tablet to the computer via USB.
    • Open Command Prompt.

  4. Reboot to Fastboot:

    • Type adb reboot bootloader to reboot the tablet to Fastboot.

  5. Reset Tablet:

    • In Fastboot mode, type fastboot devices to verify connection.
    • Enter fastboot erase userdata to wipe the tablet.
    • Type fastboot reboot to restart the tablet.

Your tablet should now be reset to factory settings.

0
0 Comments

Factory resetting a Nuvision tablet through Fastboot involves several key steps. First, ensure you have the following: a computer, a USB cable, and the ADB and Fastboot tools installed on the computer.

  1. Preparation:

    • Power off the tablet.
    • Press and hold the Volume Down and Power buttons together to enter Fastboot mode.

  2. USB Debugging:

    • If not already done, power on your tablet.
    • In Settings > About Tablet, tap ‘Build Number’ seven times to enable Developer Options.
    • In Developer Options, enable ‘USB Debugging’.

  3. Computer Setup:

    • Install ADB and Fastboot tools on your computer.
    • Connect the tablet using a USB cable.
    • Open a Command Prompt window.

  4. Verify the Connection:

    • In Command Prompt, type adb devices to ensure the tablet is recognized.
    • If not recognized, ensure proper USB drivers are installed.

  5. Reboot into Fastboot:

    • Type adb reboot bootloader in Command Prompt to reboot the device into Fastboot mode.

  6. Execute Factory Reset:

    • In Fastboot mode, type fastboot devices to ensure connection.
    • Enter fastboot erase userdata to perform the factory reset.
    • Type fastboot reboot to restart the tablet.

These steps will effectively reset your Nuvision tablet to its original factory settings.

0
0 Comments

To factory reset your Nuvision tablet with Fastboot:

  1. Power off the device.
  2. Press Volume Down + Power to enter Fastboot mode.
  3. Enable USB Debugging via Developer Options.
  4. Install ADB, Fastboot tools on your PC.
  5. Connect the tablet to the PC.
  6. In Command Prompt, type adb reboot bootloader.
  7. Type fastboot erase userdata to reset.
  8. Type fastboot reboot to restart.

Your tablet will now reboot to factory settings.

0