Bhai motherboard kharab ho gyaa h jald solution leke aao, what should I do now?
Bhai motherboard kharab ho gyaa h jald solution leke aao, what should I do now?
I recently faced this huge problem where my motherboard suddenly stopped working. It’s really frustrating because I rely on my computer for almost everything — work, entertainment, and staying connected with friends and family. When I press the power button, nothing happens at all. There are no lights, no beep sounds, and the fans don’t spin either. I’ve tried basic troubleshooting like checking the power cable and even tried a different power supply unit, but still no luck. To make things worse, I don’t have a spare motherboard to test, and I’m not exactly sure which part is causing the issue. This has put me in a really tough spot, and I need to find a solution quickly. If anyone has experienced this before or knows a quick fix, please help!
4 Answers
Start by verifying that it’s not a power-related issue. Use a different power supply unit to rule it out. Next, remove the RAM and clean the slots, ensuring there’s no dust. Re-seat all components and double-check all connections. If the issue persists, use a POST card (Power-On Self-Test) to diagnose your motherboard. This device connects to the motherboard and displays codes that can help pinpoint the issue. If the motherboard remains unresponsive even with a POST card, it may be dead and need replacement.
You should start with a detailed inspection to identify any obvious issues:
1. Visual Inspection: Look for burn marks or swollen capacitors, and smell for signs of burnt components.
2. PSU Check: Swap out the PSU for a known good unit or use a tester to check its functionality.
3. Reseat Components: Remove and reinsert the RAM, CPU, and all connected peripherals.
4. Clear CMOS: Use the jumper method or remove the CMOS battery for a few minutes.
5. Short Circuit Check: Place the motherboard on a non-conductive surface and connect only the essentials (CPU, one stick of RAM, PSU).
6. POST Card: Use a POST card to diagnose hardware issues via diagnostic codes.
7. Firmware/BIOS: Try using BIOS flashback if your motherboard supports it.
8. Peripheral Isolation: Disconnect all peripherals and attempt to boot with the minimal configuration.
If nothing works, contact customer support if your motherboard is under warranty. In many cases, a direct replacement might be necessary.
First, inspect the power supply. Often, a malfunctioning PSU is the real issue. Use a known good PSU or a tester to verify. Then, remove all RAM sticks and try to boot with one stick at a time. Consider clearing the CMOS by removing the CMOS battery for a few minutes and then reinserting it, which resets BIOS settings. Another step is to disconnect all peripherals—hard drives, GPUs, keyboards, and mice—then boot with just the CPU, a single RAM stick, and PSU connected. If the motherboard powers up, reconnect peripherals one by one to identify the issue.
Here’s a thorough approach based on my own experience:
1. Check all connections to ensure nothing is loose.
2. Reseat components like RAM and the graphics card; secure all connections.
3. Inspect for short circuits—there should be no metal or screws in contact with the motherboard.
4. Clear CMOS by using the jumper method or removing the battery for 5-10 minutes.
5. Test the PSU using a tester or swap it with a known good one.
6. Perform a bench test: remove the motherboard from the case, place it on a non-conductive surface, and connect only essential components (CPU, one RAM stick, PSU, and monitor). If it starts, the issue may be with the case.
If these steps fail, your motherboard might need replacing.