How do I reset my PS4 controller without the reset button?

50 viewsGame Console
0 Comments

How do I reset my PS4 controller without the reset button?

I recently encountered an issue with my PS4 controller where it seems unresponsive or malfunctioning. Typically, I know there is a small reset button on the back that resolves most of these problems. However, in my case, the reset button seems to be broken or non-functional. I’m feeling quite frustrated because I can’t seem to figure out how to reset my PS4 controller without the reset button. I’ve tried turning off my console, unplugging it, and even left the controller untouched for a while in hopes it would reset itself, but nothing seems to work. I’m really in need of a reliable way to get this controller back to working condition without relying on that tiny button. Any guidance or steps to address this issue would be greatly appreciated.

0

5 Answers

0 Comments

Here’s a workaround that I found effective when I couldn’t use the reset button on my PS4 controller:

  • First, make sure your controller is completely turned off by holding down the PS button until the light bar turns off.
  • Next, unplug your PS4 and leave it off for a few minutes. This helps clear any residual charge or state in both the controller and console.
  • After a few minutes, plug the PS4 back in and turn it on.
  • Use a small, thin tool like a paperclip to press down gently and simulate the reset button if possible. If not, connect your controller directly to the PS4 using the USB cable.
  • While connected, press the PS button on the controller, which should now start syncing with the console.

I have used this method successfully on several occasions, and it has helped reset my controller without needing the reset button directly.

0
0 Comments

Here’s an in-depth method that might help reset your PS4 controller when you can’t use the reset button:

  1. Charge the Controller: Ensure your controller is fully charged. Sometimes low battery can cause synchronization issues.
  2. Connect via USB: Plug your controller into your PS4 using the USB cable. Make sure the connection is stable.
  3. Enter Safe Mode:
  4. Turn off your PlayStation 4 fully.
  5. Press and hold the power button on the console until you hear two beeps (about 7 seconds apart).
  6. Connect your controller via USB and press the PS button.
  7. Rebuild Database:
  8. Navigate through the Safe Mode menu and select “Rebuild Database.”
  9. This clears out corrupted data and can fix control issues.
  10. Restart the Console and Controller: Turn your console back on normally and check if your controller works.

This detailed process goes beyond a simple reset and addresses potential deeper issues that might be affecting the controller’s functionality.

0
0 Comments

I had a similar issue recently and found a way to reset the controller without the reset button using a PC:

  1. Connect your PS4 controller to your PC with a USB cable.
  2. Open Steam and go to Big Picture Mode. This allows Steam to recognize the controller.
  3. Navigate to the settings and click on “Controller Settings.”
  4. Under “Detected Controllers,” select your PS4 controller.
  5. Click on “Calibrate” and follow the on-screen instructions to reset and calibrate your controller.

Using this method via a PC helped reinitialize my PS4 controller and resolved the issues I was experiencing. It’s useful to leverage a computer when traditional methods fail.

0
0 Comments

To reset your PS4 controller without the reset button, you can try a combination of different methods. Here’s a quick method I use:

  1. Press and hold the PS button and the Share button simultaneously for a few seconds until the light bar on the controller starts flashing. This will put the controller into pairing mode.
  2. Connect your controller to the PS4 using a USB cable to sync it back to your console.
  3. Turn on your PS4 and check if the controller is now functioning properly.

This method usually helps me when the reset button is not an option, especially since it overrides the need for the small reset button on the back.

0
0 Comments

Addressing the problem head-on without needing the reset button on your PS4 controller can be done by:

  1. Power Cycle the Console:
  2. Turn off your PS4 completely.
  3. Unplug the power cable from the back of the console.
  4. Wait for about 5 minutes before plugging it back in.
  5. Firmware Update:
  6. Ensure your PS4 system software is up-to-date.
  7. Sometimes, syncing issues arise from outdated firmware.
  8. Pairing Mode:
  9. Press and hold the PS button and Create (or Share) button until the light bar starts flashing.
  10. Keep holding until the controller starts blinking rapidly.
  11. Try reconnecting to the console via USB cable.
  12. Bluetooth Pairing:
  13. Go to “Devices” under the PS4 settings menu.
  14. Select “Bluetooth Devices” and find your controller.
  15. Follow the prompts to re-connect it.

These steps maximize the chance of resolving the issue by combining basic troubleshooting with advanced pairing techniques.

0