Why does my computer screen show an ‘out of range’ error?
Lately, I’ve been encountering an issue where my computer screen goes blank and displays an ‘out of range’ error message. It’s becoming increasingly frustrating as I cannot seem to pinpoint what is causing this problem. Whenever this error pops up, I am unable to proceed with my tasks, and it disrupts my workflow. I have tried checking the connections and adjusting the settings, but the error persists. I suspect it might be related to the screen resolution or frequency settings, but I’m not entirely sure. The various troubleshooting steps I’ve attempted so far haven’t yielded any lasting solutions, and I feel quite stuck. Can someone please explain why this ‘out of range’ error might be happening and what underlying issues could be causing this to appear on my computer screen?
5 Answers
I dealt with this problem just last month, and it was a real headache. It turned out to be related to the drivers for my graphics card. Here’s the approach I took:
1. Update Graphics Driver: Open Device Manager, find your graphics card under ‘Display adapters,’ right-click and select ‘Update driver.’
2. Use Manufacturer’s Tool: Sometimes, using the manufacturer’s tool (from NVIDIA or AMD) to ensure that you have the most recent drivers can help.
3. Change the Adapter’s Configuration: If your monitor has manual configuration settings available, access them via the monitor’s OSD menu and reset to factory defaults.
This addressed the mismatch causing the ‘out of range’ error and gave me the correct screen display.
I once faced a similar issue with my monitor displaying an ‘out of range’ error message. The root cause in my situation was an incorrect screen resolution setting. Here’s how I fixed it:
1. Boot into Safe Mode: Restart your computer and press F8 before Windows loads to boot into Safe Mode. This will load basic drivers using the lowest possible resolution settings.
2. Adjust Resolution: Right-click on the desktop, select ‘Display settings,’ and adjust the resolution to a lower setting. Apply the changes and restart your computer normally.
3. Gradual Adjustment: Once back in normal mode, gradually increase the resolution to find the highest setting that works without causing the error.
This method helped me resolve the issue permanently.
I can definitely relate to your frustration with the ‘out of range’ error on your computer screen. For me, it often happened due to incompatible refresh rates between the monitor and the graphic card. To resolve it, here’s what I did:
1. Connect to a different monitor: If you have a secondary monitor or a TV, connect your computer to it. This can sometimes bypass the error.
2. Access Display Settings: With the secondary display, go to the display settings in Windows.
3. Select the Correct Monitor: Make sure to select the correct monitor displaying the error message.
4. Adjust Refresh Rate: Look for the ‘Advanced display settings,’ and then change the refresh rate to 60Hz or another supported rate for your primary monitor.
This corrected the issue in my case, allowing my primary monitor to function correctly again.
When I had the ‘out of range’ error on my monitor, I realized it had a lot to do with the HDMI cable being used. Here’s how I solved it:
1. Quality of Cable: Ensure you use a high-quality HDMI or DisplayPort cable. Inferior cables may not support the resolution or refresh rate you desire.
2. Ports and Compatibility: Sometimes, the port on either your computer or monitor may have issues. Try using different ports to test this.
3. Check Connections: Unplug and re-plug all the cables firmly to ensure a secure connection.
Improving the connection fixed the error for me and allowed my monitor to display the signal properly.
I’ve encountered this error multiple times while working in IT support, and I’ve found that it’s often due to settings mismatched with the monitor’s capabilities. Here are some detailed steps I follow to troubleshoot:
1. Boot in Safe Mode: Restart your PC and tap F8 to enter Safe Mode.
2. Reinstall Graphics Driver: Go to Device Manager, uninstall the graphics driver, and reboot. Windows should reinstall the correct driver automatically.
3. Use a Known Good EDID: Extended Display Identification Data (EDID) can sometimes get corrupted. You can use a utility to correct the EDID data or a different monitor cable if it’s being transmitted incorrectly.
4. BIOS Settings: Unlike Windows, sometimes the issue could lie at the BIOS level, where the integrated graphics is not the primary display adapter. Check and set it correctly.
By following these steps, you can address the ‘out of range’ error more comprehensively.