How to change boot order on Windows 10?

Changing the boot order on Windows 10 might seem daunting at first, but it’s a manageable task:

1. Shut down your computer completely.
2. Turn it on and immediately press the necessary key to enter the BIOS/UEFI settings. This key is often F10, ESC, or DEL.
3. In the BIOS/UEFI settings menu, look for a section labeled Boot, Boot Order, Boot Options, or something similar.
4. You’ll see a list of available boot devices. Use the designated keys (often shown on the screen) to change the order. For my machine, it was the + and – keys.
5. Place the device from which you want to boot first at the top of the list.
6. Save your new settings before you exit, typically with the F10 key, but check your screen for the exact instructions.

Entering BIOS/UEFI settings can vary widely, so ensuring you press the correct entrance key is vital.

From experience, altering the boot order on a Windows 10 system involves accessing the BIOS or UEFI firmware settings, which you can do by following these steps:

1. Reboot the computer and press the appropriate key (often it’s F2, F12, DEL, or ESC) as soon as the computer starts. You may need to repeatedly tap the key to access the settings screen.
2. If your computer uses UEFI firmware, you might find it easier because of the newer graphical interface. Use the arrow keys or your mouse to navigate through the menus.
3. Head to the Boot, Boot Options, or Boot Order menu.
4. Here, you’ll see a list of devices. For each, you might see options like your hard drive, USB, and DVD drive.
5. Use the on-screen instructions to reorder them, placing the desired boot device at the top.
6. After setting the new boot order, save and exit. Your computer will restart with the new boot sequence.

Bear in mind to double-check the instructions displayed on your screen since they may differ slightly based on your hardware.

When I needed to change the boot order on my Windows 10 computer, the process was straightforward yet required precision:

1. First, I restarted my computer and continuously pressed the F2 key. This key varies depending on the manufacturer, so it’s good to check your specific brand’s instructions.
2. Within the BIOS setup utility, I navigated to the Boot tab. The interface can look different on various systems, but it generally involves a series of lists and submenus.
3. Using the arrow keys, I selected the Boot Order menu. This displayed all bootable devices in their current order.
4. I wanted to boot from a USB drive, so I used the ‘+’ key to promote the USB device to the top of the list.
5. Finally, I pressed F10 to save the changes and exited. This prompted an automatic restart.

I found that knowing the correct key to access the BIOS was crucial, and maintaining a careful approach in the BIOS itself was important to avoid unintended changes.

Here’s how I went about changing the boot order on my Windows 10 PC:

1. To start, reboot your computer and press the ESC, DEL, or F2 key right when it starts. You might see a prompt indicating which key to use.
2. Once in the BIOS or UEFI settings, navigate to the Boot tab. Depending on your motherboard manufacturer, this could be named slightly differently.
3. You’ll see a list of devices configured to boot in a set order. Highlight the device you want to change using the arrow keys.
4. Use the designated keys (noted at the bottom of the screen) to move the device up or down in the boot list.
5. Place the new boot device at the top if you want it to boot first.
6. Ensure you save changes by going to the Exit tab and selecting Save and Exit. This action will restart your computer.

It’s crucial to follow the on-screen instructions closely since different manufacturers may have varied ways to access and navigate the BIOS or UEFI.

To change the boot order on Windows 10, I started with these steps:

1. Restart your computer and immediately begin pressing the designated key to enter the BIOS or UEFI setup. Common keys are F2, F10, DEL, or ESC, but this can vary based on your computer’s manufacturer.
2. Once in the BIOS/UEFI setup, use the arrow keys to navigate to the Boot menu. This is sometimes labeled differently, such as Boot Order, Boot Options, or similar.
3. You will see a list of devices. Use the instructions given at the bottom or side of the screen (usually shown as keys to press like + or -) to rearrange the order.
4. Move the device you want to boot from first to the top of the list.
5. Save your changes and exit the setup (usually by pressing F10).

Remember to proceed cautiously within the BIOS/UEFI to avoid unintentionally altering settings unrelated to the boot order.