How to change redmi note 12s screen?

To change the screen on your Redmi Note 12S, you will need a few essential tools: 1. A new screen replacement compatible with Redmi Note 12S 2. A small Phillips head screwdriver 3. A plastic opening tool or guitar pick 4. Tweezers 5. A heat gun or hairdryer 6. Suction cup

Here’s a brief guide to get you started: 1. Turn off your phone and remove the SIM card. 2. Use the heat gun to gently heat the edges of the screen to loosen the adhesive. 3. Use the suction cup to lift the screen slightly and insert the plastic opening tool. 4. Carefully pry around the edges to detach the screen. 5. Disconnect the ribbon cables attached to the screen. 6. Replace the old screen with the new one and reassemble by following the steps in reverse.
Take your time and be gentle to avoid damaging any internal components.

When my Redmi Note 12S screen cracked, I took a DIY approach. Here’s how you can do it too.
1. Gather these items:
– Small Phillips screwdriver
– Suction cup
– Plastic prying tools
– Double-sided tape or adhesive strips
– Heat gun or hairdryer

1. Follow these steps:
2. Turn off your phone and remove the SIM tray.
3. Heat the edges of the screen with a heat gun to soften the adhesive.
4. Use a suction cup to lift the screen slightly.
5. Insert plastic prying tools around the edges to carefully separate the screen from the frame.
6. Disconnect the ribbon cables connecting the screen to the motherboard.
7. Remove the old screen and replace it with the new one.
8. Reconnect the cables and secure the new screen with adhesive.
9. Power on the device to test the new screen.

This method worked well for me. Take it slow, and you should be fine.

So, you’ve got a cracked Redmi Note 12S screen. Let’s get you set up with what you need and how to make it happen.
1. Tools Needed:
– A precision screwdriver set
– A plastic spudger
– A suction cup
– Tweezers
– Adhesive strips

1. Steps:
2. Preparation:
   • Power off your device.
   • Remove the SIM card and any other external components.
3. Opening the Phone:
   • Apply a heat source to the edges of the screen for about 30-60 seconds to loosen the adhesive.
   • Use the suction cup to create an opening between the screen and the frame.
   • Gently insert the plastic spudger to pry open the edges.
4. Removing the Old Screen:
   • Carefully disconnect the ribbon cables attached to the screen.
   • Remove the screen completely.
5. Installing the New Screen:
   • Align and attach the new screen.
   • Reconnect all ribbon cables.
   • Secure the new screen with adhesive strips and reassemble the phone.

If you get stuck, search for video tutorials. They’re a lifesaver for visual learners.

I recently had to change the screen on my Redmi Note 12S, and here’s my detailed take on it:
1. Tools You’ll Need:
– Precision screwdriver set
– Plastic opening tools or a spudger
– Suction cup
– Tweezers
– Heat gun or hairdryer
– Adhesive strips

1. Step-by-Step Process:
2. Preparation:
   • Turn off the phone and remove the SIM card.
   • Lay out a clean, organized workspace.
3. Heating the Screen:
   • Apply heat to the edges of the screen to soften the adhesive. This makes it easier to remove without damaging the internals.
4. Lifting the Screen:
   • Use a suction cup to create an initial gap.
   • Carefully insert a plastic tool to pry around the edges and lift the screen.
5. Disconnecting the Screen:
   • Once the screen is loose, gently lift it to reveal the ribbon cables.
   • Use tweezers to carefully disconnect these cables.
6. Installing the New Screen:
   • Position the new screen and connect the ribbon cables.
   • Ensure all connections are secure.
   • Use adhesive strips to affix the new screen to the frame.
7. Testing:
   • Before reassembling completely, power on the phone to ensure the new screen works properly.
   • Complete the reassembly and check for any loose parts.

Having patience is crucial. Rushing can lead to mistakes and potential damage, so take your time during each step.