How to remove and replace an already broken screen?
I recently dropped my smartphone, and unfortunately, the screen is completely shattered. I rely heavily on my device for both work and personal communication, so I can’t afford to leave it broken for long. I’ve read about DIY methods and professional repair services, but I’m still unsure about the best approach. How complex is the procedure of removing and replacing a broken screen on my own? I don’t have much experience with electronics, and I’m worried about possibly further damaging my device. I also wonder if it’s worth the cost and effort compared to just getting a new device or seeking a professional repair service. Additionally, I have concerns about the quality and durability of replacement screens available in the market. If anyone has been through a similar situation, I would appreciate insight into the challenges and considerations involved in removing and replacing a broken screen.
5 Answers
I had a similar situation with my smartphone, and I chose to tackle the screen replacement myself. Here’s a detailed account of my process:
- I gathered all necessary tools, including a precision screwdriver set, a suction cup tool, and a replacement screen that matched my phone model.
- After powering off my phone, I removed the screws near the charging port.
- Using the suction cup, I carefully lifted the screen away from the phone body. This step required a lot of patience to avoid damaging internal components.
- I meticulously disconnected the flexible ribbon cables attaching the screen to the motherboard.
- Aligning the new screen, I reconnected all the cables, ensuring nothing was pinched or out of place.
- Finally, I reassembled the phone, securing the screen back in place and reinstalling the screws.
This entire process took me about two hours. If you’re not confident with handling tiny, delicate parts, it might be better to consult a professional repair service to avoid further damage.
My experience replacing a broken laptop screen involved several steps. Let me break it down for you:
- Power Down and Unplug: I started by turning off the laptop and unplugging it from any power sources.
- Remove Battery: Sliding out the battery was my next step; safety first!
- Undo Screws: Using a small screwdriver, I removed the screws around the screen bezel. They were hidden under rubber covers which I carefully pried off.
- Detach Bezel: Prying the bezel away from the screen was delicate work, requiring a plastic opening tool to avoid scratches.
- Disconnect Old Screen: I carefully unplugged the cables connecting the screen to the motherboard.
- Swap Screens: Swapping the old screen with the new one was straightforward; I just reversed the steps.
- Reassemble: I reattached all components back together and powered up the laptop to ensure everything was working perfectly.
This task took about an hour but requires some familiarity with laptop interiors. If you’re uncomfortable diving into it, professional help is always an option.
Replacing a tablet screen on my own was an interesting challenge, but here’s how I did it:
- Preparation: I made sure to have the necessary tools and a replacement screen specific to my tablet model.
- Heating the Adhesive: Using a hairdryer, I gently heated the edges of the broken screen to soften the adhesive.
- Removing the Screen: With a plastic prying tool, I slowly lifted the screen, paying close attention to the digitizer to avoid damage.
- Cleanup: Once the screen was off, I cleaned away any residual adhesive.
- Installing the New Screen: I positioned the new screen and carefully reconnected any necessary cables and components.
- Final Steps: The final steps involved applying new adhesive and securing the screen in place.
Handling the heat source carefully, so as not to overheat any internal parts, was crucial. This DIY approach worked for me, though attention to detail and patience are key to avoiding damage.
When I faced a similar issue with my daughter’s tablet, I opted for a careful, methodical DIY repair. Here’s a snapshot of my approach:
– Initial Research: I started by watching several YouTube tutorials until I felt comfortable with each step.
– Acquisition: I purchased a replacement screen and a precision tool kit.
– Shutdown: I powered down the device and detached all connected components.
– Disassemble: Successfully removed the bezel with a suction cup tool.
– Replacement: After carefully detaching the broken screen, I cleaned and prepped the area for the new screen.
– Reassembly: Positioned the new screen and tested connectivity before full reassembly.
This project’s meticulous nature meant it took a bit longer, but the successful replacement was worth it. If detail-oriented work isn’t your forte, considering professional service might be better.
I decided to replace a cracked screen on my tablet after doing some research and feeling confident. Here’s a summary of my process:
- Viewed multiple online tutorials for detailed guidance on my specific tablet model.
- Acquired the necessary tools, which included a precision toolkit, adhesive strips, and a screen specifically made for my tablet.
- Powered down the tablet and disconnected it from any power sources.
- Used a plastic opening tool to gently lift the bezel and remove it without causing any damage.
- Disconnected all the tiny cables attaching the broken screen to the housing and motherboard, being careful not to tear any.
- Installed the new screen in place, ensuring all cables were securely connected.
- Tested the new screen to make sure it worked before fully securing it with adhesive and reattaching the bezel.
This process required precision and a steady hand but was very doable with patience and careful attention to detail.