How to replace a cracked screen on an HTC Desire 816?

Here’s a comprehensive guide to replacing a cracked screen on the HTC Desire 816:

1. Start by turning off the phone. Remove the SIM and SD card tray.
2. Back cover removal: Use a plastic tool to gently pry it off. Be cautious as it may require patience.
3. Remove the screws securing the mid-frame. Store them in a safe place as you proceed to disconnect the battery.
4. Detach the display connectors from the motherboard.
5. Apply heat to the screen edges to loosen the adhesive. Use a suction cup and a plastic opening tool for careful removal.
6. Align the new screen: Affix it securely and reconnect all necessary components.
7. Reassemble: Replace the mid-frame screws and put the back cover back on. Power on the device to test if the new screen functions smoothly.

This method requires careful handling at each step to prevent additional damage.

To replace a cracked screen on the HTC Desire 816, follow these steps meticulously:

1. Power off the device and remove the SIM and SD card trays.
2. Remove the back cover carefully using a plastic pry tool.
3. Unscrew the mid-frame screws with a small Phillips screwdriver, store them safely.
4. Disconnect internal cables: Gently detach the display connectors from the motherboard.
5. Heat up the front screen: Apply moderate heat using a heat gun to loosen the adhesive.
6. Remove and replace the screen: Lift the cracked screen off using a suction cup and install the new one securely. Ensure all cables are reconnected properly.
7. Reassemble the phone: Put everything back by following the reverse steps. Verify all parts are tightly secured and the phone powers up without issues.

Here’s a straightforward approach to replacing a cracked screen on your HTC Desire 816:

1. Gather essential tools and parts including a new screen, a suitable heat gun, precision screwdrivers, plastic picks, and adhesive tape.
2. Disassembly starts by turning off the phone, then removing the SIM and SD card tray. Pry open the back cover with a plastic pick.
3. Unscrew and disconnect: Remove the tiny screws securing the mid-frame and detach the battery.
4. Screen removal: Apply heat to the screen’s edges to soften the adhesive. Use a suction cup to gently lift the old, cracked screen away.
5. Replace with a new screen: Firmly place the new screen and secure it. Reassemble by reversing the previous steps. Ensure all connections are firm and the new screen is properly aligned.

The process to replace a cracked screen on the HTC Desire 816 involves several steps:

1. Ensure the phone is completely turned off. Remove the SIM and SD card tray.
2. Open the back cover using a plastic pry tool. Take care not to damage the internal components.
3. Remove the battery and unscrew all securing screws. Use a precision screwdriver and keep the screws in a safe place.
4. Disconnect the display connectors from the motherboard: Handle with care to avoid damaging any cables.
5. Heat application: Gentle heat from a heat gun will soften the adhesive around the screen’s edges.
6. Remove the cracked screen slowly using a suction cup.
7. Fit the new screen: Attach it accurately, ensuring all connectors are properly placed. Secure the screen with adhesive tape.
8. Reassemble everything: Replace screws, back cover, and ensure everything clicks in place.

When I replaced the screen on my HTC Desire 816, I relied heavily on video tutorials. Here’s the procedure:

• Preparation: Ensure the phone is powered down and remove the SIM and SD card. Gather tools like a plastic opening tool, a small Philips screwdriver, and tweezers.
• Disassembly: Start by prying off the back case gently. There will be screws to remove within.
• Battery and connectors: Detach the battery carefully. Follow by removing any connector ribbons you come across.
• Removing the cracked screen: Use a heat gun around the edges to loosen the adhesive. Employ a suction cup and a plastic opening tool to lift the screen out.
• Installing the new screen: Position the new screen carefully and adhere it firmly. Reassemble everything in the reverse order of disassembly.

Replacing the screen on an HTC Desire 816 is a fairly detailed process. Here’s how you can do it:

1. Purchase the correct replacement screen. Make sure it’s specifically for the HTC Desire 816.
2. Turn off the phone and remove the SIM card tray. You can use a SIM ejector tool or a paperclip for this.
3. Remove the back cover. Insert a plastic pry tool into the seam between the rear cover and the front panel. Carefully work your way around.
4. Unscrew the screws. Use a Philips-head screwdriver to remove all the screws securing the mid-frame.
5. Disconnect the battery. Carefully disconnect the battery from the motherboard using a plastic spudger.
6. Disconnect the screen. Locate the screen connectors attached to the motherboard. Unclip these and loosen the adhesive holding the screen.
7. Remove the cracked screen. Gently warm the adhesive with a heat gun or hairdryer, then slowly and with caution, lift the screen away using a suction cup and a pry tool.
8. Install the new screen. Align the new screen, press it down, and reconnect it. Reassemble the phone by following the steps in reverse order.

Not too long ago, I replaced my HTC Desire 816 screen. Here’s the step-by-step process I followed:

• Obtain a replacement screen kit, ensuring it includes the necessary tools.
• Start by powering down the phone: Remove the SIM card tray and the back cover using a spudger.
• Disassemble: Use a small Phillips screwdriver to unscrew the mid-frame’s 10 tiny screws. Carefully detach the battery.
• Disconnect the screen connectors securely. Apply light heat around the screen edges to ease adhesive binding.
• Remove the old screen: Use a suction cup to lift it away. Align and secure the new screen in place.
• Reassemble: Connect the battery, replace screws, and follow earlier steps in reverse. Power up to test functionality.