No adhesive in MacBook Air battery replacement kit..what do I use?

For my MacBook Air, I used industrial-strength double-sided gel tape to compensate for the missing adhesive. Here’s the process I followed:
1. Clean the battery compartment thoroughly.
2. Cut and apply strips of the gel tape where the adhesive should be.
3. Press the battery firmly into position.

This method has kept my battery secure without any movement.

When faced with this issue, I opted for Tesa 61395 tape, a popular choice for electronic repairs. It is thin, strong, and suitable for securing batteries. Here’s what you can do:
1. Clean the area to remove old adhesive residue.
2. Cut the tape into small strips according to the original adhesive’s placement.
3. Apply the strips in the battery compartment.
4. Press the new battery firmly into place.

I’ve had great success with this method; the battery stays securely and doesn’t cause any internal damage.

You can substitute the missing adhesive with Kapton tape, which is extensively used in electronics for its heat-resistant properties. Here’s how to proceed:
1. Ensure the battery compartment is clean from old adhesive.
2. Place small Kapton tape pieces on the contact points.
3. Fit the battery in place and add more tape if necessary to secure it.

This solution worked well for me, and my battery remains stable.

In my case, I consulted a tech-savvy friend who suggested using 3M double-sided adhesive strips. Follow these steps:
1. Remove any old adhesive from the compartment.
2. Cut and apply the 3M tape strips precisely in the designated spots.
3. Firmly place the battery, ensuring proper alignment with connectors.

I found this advice very helpful; the battery stays in place perfectly.