What can I do if my Mac won’t turn on after dying?
What can I do if my Mac won’t turn on after dying?
I was using my Mac when it suddenly ran out of battery and shut down. After plugging it in and waiting for a while, I tried turning it back on, but nothing happened. The screen remains black, and there’s no sound or indication that it’s powering up. I’ve checked to make sure the charger is working and properly connected. It’s frustrating because I rely on my Mac for work and personal tasks. What could be causing this issue, and why won’t my Mac turn on after dying? I’m worried something might be seriously wrong with it.
5 Answers
When you face this, start with the basics:
1. Reconfirm that the charger works fine and is properly connected.
2. Hold the power button pressed for 10 seconds, this often helps reset internal components.
3. Perform a PRAM reset by holding Command + Option + P + R during startup.
4. If these steps don’t help, it might be linked to an internal battery or hardware connection. Visiting a service professional might be necessary to diagnose the hardware.
Try this approach: unplug everything, wait a few minutes, then plug in just the charger and see if your Mac responds.
1. Confirm that the power source is effective. Try a different outlet or even another charged device on the same outlet to ensure there’s power.
2. Keep the power button pressed for 5 to 10 seconds.
3. If there’s no response, reset the NVRAM by pressing Command + Option + P + R simultaneously when powering up and hold them until you hear the startup sound for the second time.
4. If your Mac is still unresponsive, it might be a good idea to check for any visible damage or consider professional assistance.
First of all, ensure that the charger is functioning. Sometimes it’s a simple power connection issue. Verify that the light on the charger is either amber or green. If there’s no light, try a different outlet or cable.
1. Press and hold the power button for about 10 seconds.
2. Release the button and press it again to see if the Mac powers up.
3. If it doesn’t, attempt an SMC reset: for a MacBook with a non-removable battery, press Shift + Control + Option on the left side of the keyboard and the power button simultaneously and hold them for 10 seconds, then release.
4. Finally, if none of these steps work, visiting an Apple Store or reaching out to Apple Support for a hardware check would be advisable.
This is a situation I’ve encountered and it’s quite unnerving:
1. First, check if the charger is providing power by observing if the LED light (amber/green) is on.
2. Let the Mac charge for at least 15-20 minutes before trying to power on again.
3. Hold down the power button and the Shift, Control, Option keys at the same time for 10 seconds, then release all and press the power button again.
Here’s something that might help. Ensure the battery is really charging. Sometimes it takes some time for the Mac to show signs of life.
1. Allow it to charge uninterrupted for at least 10-15 minutes.
2. After waiting, press and hold the power button for 10 seconds.
3. If still nothing, try changing the power plug location or swapping chargers if available.
4. If there’s no change, performing an SMC reset usually addresses many power-related issues – for your Mac model, the process should involve pressing Shift + Control + Option along with the power button for 10 seconds.
5. If the issue persists, professional diagnostics might be necessary.