Why am I experiencing water damage no sound issues on my device?

When my device had no sound due to water damage, it was incredibly frustrating. Here’s what I did to eventually resolve it:

1. Power Off: Immediately turned off the device.
2. Drying Attempts: Left it in a warm, dry place (not direct sunlight).
3. Contact Cleaner: Used electronic contact cleaner spray to displace the water around the audio jack and speaker grill.
4. Professional Inspection: Finally, after DIY methods failed, I took it to a professional repair center.

Turns out, there was corrosion on the internal circuitry which needed professional cleaning. If DIY methods don’t work, professional help might be necessary.

Having no sound on your device after water damage is a common issue. Here’s what I discovered works well:

Firstly, the device should be turned off immediately to prevent short circuits. Dry the external parts with a microfiber cloth. Then, utilizing an anti-moisture product like DampRid (or an equivalent), I placed my device in an enclosed space with it for a couple of days. This greatly improved my device’s audio functionality.

Experiencing no sound after water damage is something I went through as well. Here’s an approach that worked for me:

After ensuring my phone was thoroughly dried (using silica gel packs for 48 hours), I found distinct moisture spots around the speaker holes. Carefully, I used a vacuum cleaner on the lowest setting to try and suck out any remaining water. It’s important to be gentle so as not to cause further damage. Eventually, the sound started working again after a few tries.

From my experience, dealing with water damage and no sound issues can be a bit of a gamble. Here’s my approach:

1. Immediate Shutdown: Shut down the device and remove all cases and covers.
2. Isopropyl Alcohol Bath: Submerged the phone’s lower half in 99% isopropyl alcohol, which evaporates fast and helps displace water.
3. Thorough Drying: Let it dry for 24 to 48 hours in a well-ventilated room.
4. Sound Test: After reassembly, I powered it on and checked the sound.

The isopropyl alcohol bath helped clean and dry the internal components effectively.

I noticed the same problem with my phone after it got wet. What often happens is that water shorts out the internal components, and drying it out can sometimes bring it back to life. Here’s a method:

1. Shut Down the Device: Power your device off completely.
2. Dry it Quickly: Use a soft cloth to wipe the outside and then place it in a bag of uncooked rice or cat litter overnight.
3. Inspect it for Visible Water Damage: Use a flashlight and magnifying glass to check the audio jack and speaker holes.
4. Use a Hair Dryer: On a cool setting, blow-dry the device, especially around the speaker area.

This might help dry out the internal components and restore sound functionality.

The issue you’re describing sounds like it could be related to residual water trapped inside the device. Here’s what I did when I faced a similar problem:

1. Turn Off the Device: Immediately switch off your device to prevent any further electrical damage.
2. Remove Moisture: Gently shake the device to remove any excess water.
3. Use Silica Gel Packets: Place the device in a sealed bag with silica gel packets to absorb the moisture for at least 48 hours.
4. Check for Sound: After drying, power up the device and test the sound.

This fixed my issue, and it’s worth trying out before you consider more drastic measures.