Why my Huawei U8650 won’t turn on?
Why my Huawei U8650 won’t turn on?
I have been using my Huawei U8650 for a while now, and recently, it just stopped turning on. I’m really puzzled because it was working perfectly fine before. When I press the power button, nothing happens at all—no vibration, no lights, nothing on the screen. I’ve tried charging it, thinking the battery might be dead, but there’s no indication that it’s even charging. I also checked the charger and cable with another device, and they seem to be working fine. I’m really concerned because all my important data and contacts are on this phone. I’m not sure if it’s a hardware issue or something else. Can anyone relate to this problem with the Huawei U8650, or has anyone experienced something similar? I’m looking for any insights into why my Huawei U8650 won’t turn on.
10 Answers
Greetings! I faced this with my Huawei U8650 due to a corrupted SD card. Here’s a simple check you can do:
1. Remove the SD card from your device.
2. Try turning on the phone without the SD card.
Corrupted SD cards can occasionally cause the phone to hang during the boot process. You might need to format or replace the SD card if this is the problem.
This sounds exactly like what I faced with my Huawei U8650 when its battery completely died. I fixed it by using an external battery charger. Here’s how you can do it:
1. Use an external battery charger to recharge the battery directly.
2. After charging, place the battery back into your phone.
3. Try turning it on with the Power button.
Sometimes, the battery can’t recharge through the phone if it’s completely dead. If recharging the battery externally or replacing it doesn’t work, you might need to have the battery and phone checked.
Your Huawei U8650 might be in a deep discharge state, making it appear dead. Try these steps:
1. Plug the phone into its original charger and let it charge for at least one hour.
2. After an hour, unplug the charger and plug it back in immediately.
3. Attempt to turn on the phone by holding the Power button for about 20 seconds.
This method helped my phone to start charging gradually and eventually powered on. If this doesn’t help, it might be a more complicated issue involving the charging circuit.
I had the same issue with my Huawei U8650 before, and a hard reset fixed it for me. Here’s what you can try:
1. Remove the battery from the phone and wait for about 10 minutes.
2. Reinsert the battery.
3. Press and hold the Power button and the Volume Up button at the same time.
4. Continue holding until the Huawei logo appears on the screen.
If this doesn’t work, it might be a battery problem. Trying a different battery could help, as sometimes batteries become faulty and prevent the phone from powering up.
Hi! One time, my Huawei U8650 wouldn’t start because of a firmware issue. Here’s what worked for me:
1. Simultaneously hold the Volume Up, Volume Down, and Power buttons.
2. Keep holding until the screen flashes and the Huawei logo appears.
3. Release the buttons when you see the recovery menu, and from there, try to reboot or restore the device.
This resolved the firmware crash for me. However, persistent software issues might require professional service.
Your problem sounds familiar. My Huawei U8650 once wouldn’t turn on because the power button was faulty. Here is how you can check for this issue:
1. Press the power button repeatedly and check for any response.
2. If there’s no response, try applying a small amount of contact cleaner around the button area (ensure the device is powered off and the battery is removed beforehand).
3. Use a toothpick to gently press and clean the area around the button.
If the button’s malfunctioning is confirmed, you might need to replace or repair the button itself.
I encountered the same problem with my Huawei U8650, and it was due to a software issue. Here’s how I fixed it:
1. Connect your phone to a computer using a USB cable.
2. Hold down the Power button and Volume Down button together.
3. Wait for the computer to recognize the device.
This process triggered a response from my phone, and it booted up normally. If this doesn’t work for you, the issue could be more serious, either software-based or a potential hardware failure. Consult a technician if needed.
I had a similar experience with my Huawei phone and discovered it was due to moisture exposure. Here’s my approach for dealing with potential moisture:
1. Place the phone in a container filled with uncooked rice or silica gel packets.
2. Leave it in that environment for 48 hours to absorb any moisture.
3. After the drying period, try turning on the phone.
Even small amounts of moisture can prevent your device from powering on, and this method often helps by absorbing internal moisture.
This problem happened to me as well, and I managed to fix it by recharging the completely drained battery externally. Here’s what I did:
1. Remove the battery and use an external charger to charge it fully.
2. Once the battery is charged, place it back in the phone.
3. Turn on the device with the Power button.
If your battery isn’t charging through the phone, an external charger can sometimes be a good solution. If you’re still having trouble, the battery might need replacement.
Hey there! I went through the same thing with my Huawei phone and found that it was a hardware fault. Here are some things you can inspect:
1. Check the charging port for dust or debris blocking it.
2. Try a different charging cable and adapter as sometimes the accessories might be faulty.
3. If comfortable, gently remove the back cover and inspect the battery and connections to ensure everything is secure.
If these solutions don’t work, you might need to have your device inspected by a professional technician to identify and fix the hardware issue.